AGREEMENT & CONTRACT RIDER

 

A 50% DOWNPAYMENT IS REQUIRED ON ALL CUSTOM FABRICATED STONE AT THE TIME OF MEASURE OR ORDER PLACEMENT. THE BALANCE IS DUE UPON INSTALLATION.

NATURAL STONE IS PRODUCT OF NATURE AND IS THEREFORE SUBJECT TO ALL ITS INHERENT VARIATIONS. CAST VEINING, MARKINGS AND COLORATION OF THE FINAL PRODUCT MAY VARY.

REMOVAL OF OLD COUNTERTOPS OR APPLAINCES IS NOT INCLUDED IN YOUR QUOTATION. AT YOUR DISCRETION WE CAN ARRANGE FOR REMOVALS WITH AN INDEPENDENT CONTRACTOR FOR A NOMINAL FEE.

WE DO NOT DO PLUMBING OR ELECTRICAL WORK. WE CAN ARRENGE FOR DISCONNECTIONS, AND HOOK-UP OF APPLIANCES AND SINKS WITH AN INDEPENDENT CONTRACTOR FOR A NOMINAL FEE. ANY KIND OF CONSTRUCTION ACTIVITIES OTHER THAN GRANITE COUNTER TOP FABRICATION AND INSTALLATION IS EXCLUDED.

AS A MATTER OF POLICY WE DO NOT CONNECT DISHWASHERS TO THE STONE COUNTER TOP. THIS IS FOR YOUR PROTECTION. VIBRATION, HEAT AND STEAM WILL INVARIABLY LEAD TO COMPLETE ANCHOR FAILURE AND. OR CRACKING OF THE STONE COUNTERTOP. DISCUSS ARRANGEMENTS WITH OTHER SUB-CONTRACTORS TO CONNECT TO WOOD FURRING STRIPS OR THE FLOOR OR WALL, PRIOR TO THE GRANITE INSTALLATION.

DEPENDING ON THE LAY OUT, STONE TYPE AND LIGHTENING THE LOCATION OF THE SEAM WILL BE DETERMINED BYGERELI.

THE OVERHANGS CANNOT BE MORE THAN 11" UNLESS ADDITIONALY SUPPORTED BY GENERAL CONTRACTOR STANDARD OVERHANG FOR A 24" BASE CABINET IS BETWEEN 1" AND 1 1/2" DEPENDING ON THE FIELD CONDITIONS.

FOR CORRECT SIZING PLEASE PROVIDE ALL SINKS, INSTANT HOT, SOAP DISPENSERS, FILTERED WATER LMTS AND ALL OTHER FIXTURES PHYSICALLY ON-SITE AT THE TIME OF MEASUREMENT.

SINK;

IF YOU ARE UNDER-MOUNTING YOUR SINK: WE MUST HAVE YOUR SINK AND/OR TEMPLATE BY THE TIML UF THE MEASUREMENT SO THAT WE MAY CORRECTLY SIZE YOUR CUTOUTS DURING FABRICATION. BEFORE PURCHASING THE SINK ASK FOR DIMENSIONAL APPROVAL. FOR CLEANING AND FABRICATION PURPOSES UNDERMOUNTED SINK CUT- OUT WILL OVERHANG %" FROM THE UNDER MOUNTED SINK EDGE. IF YOU HAVH A CAST IRON SINK PLEASE PROVIDE ALL THE NECESSARY ARRANGEMENTS BEFORE INSTALLATION AS PER GERELI INSTRUCTION SHEET FOR UNDERCOUNTER KITCHEN SINK.

IF YOU HAVE DROP-IN SINK: DROP IN SINK CUTOUTS ARE EXECUTED AT THE INSTALLATION. HAVE YOUR SINK ON HAND.

PLEASE PROVIDE LOCATIONS OF THE FAUCET AND SOAP DISPENSER HOLES DURING INSTALLATION.

ALL COOKTOPS ARE CUT AT THE JOBSITE. FOR OTHER TECHNICAL CONSIDERATIONS HAVE YOUR COOKTOP UN HAND AT THE TIME OF MEASUREMENT.
WE WAX YOUR EDGES AND SEAL YOUR COUNTERTOPS AUTOMATICALLY AT THE PLANT AFTER FABRICATION.

AFTER INSTALLATION, THE MECHANIC WILL APPLY ONE MORE COAT OF SEALANT. FOR MORE INFORMATION ABOUT STONE CARE, PLEASE CHECK OUR MAINTENANCE DATA SHEET.

ALL OUR INSTALLATIONS ARE FULLY WARRANTED FOR MATERIALS AND LABOR AFTER INSTALLATION ANY KIND OF PROTECTION IS EXCLUDED. GERELI IS NOT RESPONSIBLE OF ANY DEMAGE BY OTHER PARTIES.